Freehand
$13
Reviews
reviewed by zamstromic bla(Dan Ickler)
i have a bunch of these yoyos. i love this yoyo because of the gap and the way it plays on the string. it has these friction stickers for
yoyoing but if u run out, use tub tread and sand the treads down with sandpaper. the yoyo is meant for freehand skills but it can be
used for offstring and regular yoyoing. i especially like to use it for regular yoyoing. GET THIS YOYO! its only like $13. its cheap. its
perfect. i believe this is one of duncans best yoyoes. it had very good sleep times, godly like on the string ( to me that is) and is really
good for offstring and freehand skills. take out one of the friction stickers when u first get it and put it somewhere safe. u'll need it later.
now get ready to YO!!!!
Tips
Tip from Lil-Stan, thanks Lil-Stan
Take two turbo tread break disks, and put them on and take one o-ring out
Mods
Mod from Zamstrom (Dan Ickler)
Supplies:
bench sander
file or very corse snadpaper
two freehand shells
two bee spacers
one playing card
one paper punch
one freehand bearing
one freehand axle
one freehand bolt
two washers (they are about 3 inches wide and 3 inches tall...they fit in the freehand pretty good
krazy glue
black fingernail polish
one frictiondisk
one kinife
flat head screw driver
hammer
Directions:
1. first things first unscrew the yoyo and take out the guts.now pop out the
caps using a flat head screw driver and hammer
2.take out the bolt and axle careflully and plug in the bench sander.
3. u see the ridge? its like a second ring.. u need to sand the yoyo all the way
down to that. start the sander on and start sanding!
4. u'll notice that the some of the plastic is starting to melt.. make sure u
complete the sanding till u take the melted plastic off.. now when your done
take off the heated plastic with a exatco knife or cutting knife or something
5. u should now have some shells pf the freehand.. the yoyo will be small now..
hehe...
6. u have to make sure its flat.. so get some sandpaper out and start to sand
down with it.. its ok if u don't exaclty get it but it makes the yoyo look
better.
7. onece your done start to glue the washers on the freehand with krazy glue..
then when thatd dried up get the black nail polish and color the rims black.. it
makes it look cool...
8.let that dry off..now get your playing card and cut some shims out the same
size as the bee spacers... now use the paper punch to punch out a hole.. now
stick one one each spacer hole.. then put the spacers in,the bearing, and
everything else and screw together and yo!
|
|